Epoxy Resin Countertops - Machining
Typical factory machining options for epoxy resin tops are listed below. Diamond tooling is required to fabricate and machine epoxy resin making machining operations most easily and economically done in the factory as opposed to in the field.
Machining Options
| ID | Description |
|---|---|
| MC-DISINK | Sink Cutout - Drop-In |
| MC-DISINK-D | Sink Cutout - Double Drop-In |
| MC-UMSINK | Sink Cutout - Undermount |
| MC-UMSINK-D | Sink Cutout - Double Undermount |
| MC-CUPSINK | Sink Cutout - Cupsink |
| MC-DBGROOVE | Drainboard Groove (per Groove) |
| MC-HOLE | Small Hole - Less than 3" Dia. |
| MC-MEDHOLE | Medium Hole - Between 3" to 6" Dia. |
| MC-LGHOLE | Large Hole - Greater than 6" Dia. |
| MC-RODSOCKHOLE | Counterbore Hole for Recess Mount Rod Socket |
| MC-PIPECHASE | Pipe Chase Cutout |
| MC-COLUMN | Column Cutout |
| MC-NOTCH | Notch Cutout (around shelving uprights) |
| MC-CRNRAD | Corner Radius - Less than 6" |
| MC-ANGLE | Angle Cut |
| MC-ELECBOX | Single-Gang Electrical Box Cutout |
| MC-ELECBOX-D | Double-Gang Electrical Box Cutout |
-
Epoxy Resin Countertops
-
Performance